TQC/Sheen

Grindometer DIN-ISO 1524 with 2 grooves, incl. bevelled edge and pouch

Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate, etc.. Most TQC Sheen...

Impact Test

The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each...

MECHANICAL CONCRETE TEST HAMMER

Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and...

MFFT-MINIMUM FILM FORMING TEMPERATURE BAR 20 Sensors

Temperature Gradient Plate for determining minimum film forming temperature test. The minimum film forming temperature is the lowest temperature at which an emulsion, latex or adhesive will uniformly...

PENCIL SET 8B-10H

PENCILS FOR HARDNESS TEST ACCORDING WOLFF WILBORN Koh-I-Noor 1500 set of 20 pencils in an aluminum case to use with the Wolff Wilborn Hardness Test. Pencils ranging from 8b -2H When testing by...

Pendulum Hardness Tester

The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the...

Permeability cups

Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems, and related products. The Permeability cup consists of a cup, seal ring, and cover ring...

Plastic Wet Film Comp (Mils & Microns) - 500 Pieces

The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet...

Powder Coating Ground Tester

New conveyor ground test with five steps which informs you whether items to be painted are sufficiently grounded. Specially designed for electrostatic coating applications. A poor ground of the...

POWDERTAG THICKNESS ANALYSING GAUGE

PowderTAG uses ultraviolet techniques to measure the thickness of powder coatings in precured and cured status. Precise, reproducible and non-destructive. PowderTAG uses ultraviolet techniques to...

PROBES FOR CURVEX OVEN DATALOGGERS

TQC offers a wide range of sensors suitable for measuring the oven CurveX system. All sensors feature standard thermocouple K connectors and are universally interchangeable with other temperature...

PYCNOMETER Density Cup -100cc or 50 cc (SS or AL)

Specific Gravity Cup for determining the specific gravity or density (or weight per gallon wpg) of coatings, pastes or similar liquids.Density is defined as weight per unit volume at a specified...

Replacement Tape for the Dust Tape Kit

RESISTIVITY GAUGE FOR COATINGS

A simple instrument for measuring the surface resistivity of electrostatically sprayed coatings. The probe is easy to clean and is immersed in the coating. The measured value is recorded on an analog...

SAG INDEX APPLICATOR

The Sag Index Applicator is especially designed for sag resistance evaluation. The total film width of 90mm is equally divided into 10 gaps, incremented in depths of...

SCLEROMETER HARDNESS TESTER STANDARD / PRO

The TQC Hardness Pen is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics, or related products. A tungsten carbide tip is...

SHORE DUROMETER A or D

The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the...

SHORE HARDNESS GAUGE TEST STAND

The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer...

SoloGloss 60 - PolyGloss 60/20/85

Which Glossmeter suits which application? The TQC Sheen Glossmeter comes in two models. The Sologloss glossmeter measures 60° and the Polygloss glossmeter 20°/60°/85°. The...

SP3000 - CROSS HATCH TEMP

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and...

SPARE THERMOMETER DE Deg F (BACHARACH)

SPARE THERMOMETER DE Deg F (BACHARACH)

Sponge Tester / Expansion Kit

The TQC Low Voltage Pinhole detector enables the user to inspect various coatings on conductive substrates for small defects such as holidays and pinholes using the ‘wet sponge technique’...

SPRING LOADED ROLLER FOR DUST TEST TAPE

The TQC Spring Loaded Roller is used to perform objective dust tests according to ISO 8502-3 and eliminates human error by pressing with a constant force on the dust test tape. The ISO 8502-3...

STOPWATCH/CLOCK DIGITAL

DIGITAL STOPWATCH Simple yet accurate digital TQC stopwatch, resolution to 1/100th of a second. Split times, built-in alarm. Clear display with large digits. Ultra flat and robust water- and...

SUPER-PIG DESTRUCTIVE COATING THICKNESS GAUGE

The TQC SP1100 SuperPIG is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also...