Created with Sketch. Created with Sketch.

DUROMETER

  • Model No. PHT-980   Shore D Durometer
 
Shore D scale is for testing the following materials:

Rubber: Hard
Plastics: Harder grades such as rigid thermoplastics, plexiglass, thermoploystrene, vinyl, sheet, cellulose acetate, thermosetting
Laminates (ie Formica) 
Other: Paper filled calendar rolls, calendar bowls, etc. (materials that would not normally indent under fingernail pressure, such as a pocket comb or bowling ball).

 
 	 
 
Specifications:
Measuring range: 0-1000HSA (0-100 HSD)
Deviation: <1%H
Resolution: 0.5H
Digital readout
Auto Hold feature
Accurate and repetitive deviation = 20~90HSA
HSA<+/-1 grade
Uses 1-SR44 Button Cell Battery
Custom rugged carry case
 
Designed to test the hardness of Rubbers and Plastics
These sleek handheld hardness testers are crafted and engineered to perform at the highest level of accuracy. An ergonomic lightweight design assists in taking precise and consistent hardness measurements.

    Model No. PHT-980 Shore D Durometer

    Model No. PHT-980   Shore D Durometer   Shore D scale is for testing the following materials: Rubber: HardPlastics: Harder grades such as rigid thermoplastics, plexiglass, thermoploystrene, vinyl, sheet, cellulode...

    $248.00
    Add to Cart
  • SHORE DUROMETER A or D

    SHORE DUROMETER A or D

    The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the highest measured result. Delivery includes a simple test...

    $450.00
    Choose Options
  • SHORE HARDNESS GAUGE TEST STAND

    SHORE HARDNESS GAUGE TEST STAND

    The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture. With this test stand hardness tests of rubber...

    $585.00
    Add to Cart
  • SHORE HARDNESS TESTBLOCK KIT

    SHORE HARDNESS TESTBLOCK KIT

    Shore A and D Test Blocks Test Block Type D 25 (Red) Test Block Type D 46 (Black) Test Block Type D 75 (Blue) Test Block Type A 30 (Black) Test Block Type A 50 (Grey) Test Block Type A 75 (Red)

    $25.00
    Choose Options
  • The PosiTector Shore Hardnesss Durometer

    The PosiTector Shore Hardnesss Durometer

    PosiTector® SHD   Shore Hardness Durometers for the indentation hardness of non-metallic materials Handheld electronic instrument measures the indentation hardness of non-metallic materials. Two durometer models are available for...

    $495.00
    Choose Options
  • Type DO Durometer

    Type DO Durometer

    The Model 1600 features a full-sized dial face for readability to within 1/2 point. The Model 1600 offers the maximum accuracy available in a dial model gauge at a minimum cost. Size: 2.5" x 6.125"HWeight: 6 oz. FEATURES: Includes NIST Calibration...

    $450.00
    Add to Cart