HoldTight® 102 and 365

HoldTight® 102 and 365

When water is not enough, HoldTight® - a 100% volatile salt remover is the best way to get a clean surface. It removes surface contaminates, salts and light oils and greases. It evaporates off with the water leaving a surface clean and ready to paint. Whether Soda Blasting a Car or removing salt from an Off Shore Rig - HoldTight is the only NON-IONIC cleaner on the market.

NEW- HoldTight 365 Rust Inhibitor that prevent rsut for upto 1 year.

 

  • HoldTight 55 GALLON DRUM

    HoldTight 55 GALLON DRUM

    HoldTight® 102 is the only NONIONIC salt remover on the market. Other salt removers use Salts to remove Salts. After using the other salt removal products you must WASH OFF the Salt removers because they are as bad as what you are trying to remove...
    $2,620.00
    Add to Cart
  • HoldTight® 102 is the only NONIONIC salt remover on the market. Other salt removers use Salts to remove Salts. After using the other salt removal products, you must WASH OFF the Salt removers because they are as bad as what you are trying to remove. It also helps remove light oil deposits and dust left from abrasive blasting.

    HoldTight 5 Gallon Pail

    HoldTight® 102 is the only NONIONIC salt remover on the market. Other salt removers use Salts to remove Salts. After using the other salt removal products, you must WASH OFF the Salt removers because they are as bad as what you are trying to remove...
    $265.00
    Add to Cart
  • HoldTight 365

    HoldTight 365

    HT 365™ can be applied to untreated surfaces or those that have been treated with HoldTight® 102. By preserving the blast for up to one year, HT 365™ allows your crew to work with maximum efficiency, giving you peace of...
    $550.00
    Add to Cart
  • The biggest problem encountered when using HoldTight is the quality of the Washwater available at the site.  HoldTight, as with any cleaning product, works best with good quality water.  This kit contains the tests you need to run to make sure there are no water quality problems.  All the tests are quick and easy.

Kit Contains:

Oakton conductivity meter

Calibration solution

Hardness test strips - 0,   30,   60,   120,  180 ppm

                               <-- excellent - good - High -->

pH paper. - 4.5 to 10

Carry Case

    HoldTight Water Quality Test Kit

    The biggest problem encountered when using HoldTight is the quality of the Washwater available at the site.  HoldTight, as with any cleaning product, works best with good quality water.  This kit contains the tests you need to run to make sure...
    $175.00
    Add to Cart