1 ROLL ADHESIVE ISO TAPE The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit... $25.00 Add to Cart Compare
10X Surface Microscope Graduated Surface microscope with built-in LED ring light and measuring scale in pocket size complete with hard leather case. Ideal for inspecting, tracking, and measuring coating defects... $99.00 Add to Cart Compare
4 to 60 mil WFC TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4). Similar to the Nordson in looks and quality but less expensive. $49.00 Add to Cart Compare
BIRD Film Applicator - SingleSided TQC Sheen Bird-type film applicator with one flat edge. One application side for applying 1 predefined thickness. The Bird-type applicator single gap is available in film width 50 and 75 mm and... $295.00 Choose Options Compare
Bird-Type film applicator - 4 sided TQC Sheen Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 60, 75,... $525.00 Choose Options Compare
Bresle Patches - TQC TQC Bresle patches mate to meet ISO 8602-6 Standards. has a clean removal, negligible patch contamination, no breaking foam and is silicone-free. Box of 25. $115.00 Add to Cart Compare
BUCHHOLZ HARDNESS TESTER The TQC Buchholz Hardness Indentation Test provides a method for carrying out an indentation test on coatings complying with the ISO 2815-2003 standard. The TQC Buchholz Hardness Indentation Test... $930.00 Add to Cart Compare
Concrete Moisture Meter - 0-6% The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just... $595.00 Add to Cart Compare
CONICAL BEND TESTER ISO/ASTM The TQC Bend Test Conical Mandrel “Pro” is a laboratory apparatus to bend coated test panels over a conical shaped mandrel to assess the elasticity or resistance of a coating-, paint or... $1,495.00 Add to Cart Compare
Cross Cut Adhesion CC2000 BASIC KIT The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross... $225.00 Choose Options Compare
CurveView Gradienty Oven The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles, varying from ambient +5˚C to 250˚C / ambient +9˚F to... $39,500.00 Add to Cart Compare
CURVEX-3 OVEN LOGGER STANDARD KIT Profiling an industrial powder coating oven starts right here with the CurveX 3 Standard Oven Logger KIT. It contains all necessary items, just add the desired magnetic or clamp-type probes to make... $1,795.00 Add to Cart Compare
CYLINDRICAL MANDREL TESTER ISO-DIN-ASTM - METRIC The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519. A test panel (max. size 150 x 100 mm) is bent over a... $435.00 Choose Options Compare
Densimeter H-300S Densimeter to calculate the specific gravity. The density value is displayed automatically after the elapsed time. Density resolution: 0,001 g/cm3 Scale capacity: 0,01….300g Measuring time:... $3,925.00 Add to Cart Compare
DRYING TIME RECORDER The new TQC Drying Time Recorder is a fully digitally controlled machine that operates conform the BK (Beck Koller) method Standards: ASTM D5895, DIN EN 14022, ISO... $75.00 Choose Options Compare
Dust Tape Kit The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating... $155.00 Add to Cart Compare
ELITE CONDUCTIVITY / TDS / SALINITY The Elite Pocket Tester simultaneously shows conductivity/TDS*/Salinity and temperature. This meter is standard supplied with the Bresle Kit, in which it is used to measure soluble salts. The Elite... $155.00 Add to Cart Compare
FILM Applicator 2 RESERVOIR, 4 GAP 4-SIDED FILM APPLICATOR, DUAL RESERVOIR, 100|200|300|400ΜM Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the... $749.00 Add to Cart Compare
FILM APPLICATOR FOR SAG AND LEVELLING Standards: ASTM D1084, ASTM D4400 The TQC Sag and Levelling Film Applicator is a special film applicator with dual function. One side with 10 gaps from 75 to 300 micron... $505.00 Choose Options Compare
FILM ApplicatorLICATOR 2 RESERVOIR, 4 Gap Cube applicator for applying a paint film of uniform thickness. Each Cube Applicator can apply 2 pre-defined thicknesses, or 2 thicknesses to customer specifications. TQC Sheen Cube Applicators are... $232.00 Choose Options Compare
Film Applicators "BAKER" type 4-sided Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different predefined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and... $410.00 Choose Options Compare
Hull Roughness Tester TQC has made the next evolutionary step in hull roughness surveys. Surpassing the industrial standards with an easy to operate 4-way directional push button, graphical representations, storage of... $4,658.00 Add to Cart Compare
Impact Test The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each... $1,830.00 Add to Cart Compare
MECHANICAL CONCRETE TEST HAMMER Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and... $600.00 Add to Cart Compare
