Inspection Accessories

Needle Pressure Gage

The Clemtex Needle Pressure Gauge is designed to measure air pressure in blast hose and air hose. Proper use of this gauge will measure pressure drops that are responsible for decreased production...

pH Paper (0-14) 100 Tests

Used for rapid pH testing directly at the point of interest, strips are always ready for immediate use. Designed for safe testing of dangerous, poisonous, or aggressive liquids Long handle...

Blotter Paper - Pack of 25

ASTM D4285 - Standard Test Method for Indicating Oil or Water in Compressed Air - Blotter Paper Significance and Use 2.1 Clean compressed air is required to prevent contamination of coating...

Nozzle Orifice Gage

Measures the orifice size of an abrasive blast cleaning nozzle. This nozzle orifice gage can be used to monitor nozzle wear that can result in lower blast pressure, higher air volume demand (CFM),...

Lighted Telescoping inspection Mirror

  Two LEDs—at 2 o'clock and 10 o'clock—spread light evenly over the viewing area Extra-long telescoping arm Fully polished, shatterproof glass mirror 360° double ball joint allows fine angle...

Telescope Insp Mir, 11.5-16" 2 x 3-1/2"

The #570 Telescoping Rectangular Plastic Inspection Mirror enables hobbyists and DIYers to inspect inaccessible areas.  SPECIFICATIONS Mirror dimensions: 2 x 3-1/2 in. Arm length: 11-1/2 to 16 in...

HD VideoScope /Articulating Probe with Optional Wireless Handset

NOTE: DUE TO THE LARGE NMBER OF OPTIONS _ THESE ARE NOT A STOCK ITEM SpecificationsCamera Minimum Focus distance 2.36" (60mm); macro: 0.59 (15mm)Field of View 65Shaft diameter 0.24" (6mm)Working...