The W-PT is the fastest way to verify the operation and specification compliance of MPI Yokes
The W-PT-DB is made with Artificial Defects for training and demonstration purposes.
The W-PT can be stacked either 4 or 5 high for use with DC Yokes
Used to verify the accuracy of the Western Instrument gauss gauges.
Literature And Standards
Metal Testing - UT- Flaw Detection - Hardness - Bolt Tensioning - Pipline Locators
Pit Depth Gauges
MPI - Yokes And Coils
Flashlights - Light Meters
CENTRIFUGE TUBES ARE USED TO PERFORM A SETTLING TESTS ON WET METHOD INSPECTION MEDIA (VISIBLE OR FLUORESCENT). 100ML OF A WELL AGITATED (THOROUGHLY MIXED) BATH IS POURED INTO THE CENTRIFUGE TUBE.THE BATH IS ALLOWED TO SETTLE (AS PER SPECIFICATION) FOR A...
FOIL MAGNETIC INDICATORS ARE AVAILABLE IN TWO GENERAL TYPES; CASTROL STRIPS; AND QUALITATIVE QUALITY INDICATORS. EACH TYPE OF INDICATOR IS AVAILABLE IN DIFFERENT SENSITIVITIES. INDICATOR STRIPS ARE USED TO EVALUATE THE SENSITIVITY OF A GIVEN MAGNETIC...
Ketos Rings are outlined in most MPI Specifications, as a tool for the overall evaluation of an MPI System. Provides the operator with a qualitative measure of Defect Sensitivity, Bath (particle) Performance, and Equipment OutputDatasheet: WI-KETOS
MAGNETIC STRIP CARDS ARE A CONVENIENT METHOD TO ANALYZE THE SENSITIVITY OF MPI MATERIALS. THREE DIFFERENT STRIPE CARDS ARE AVAILABLE; TYPE A (DRY PARTICLE); TYPE B (WET METHOD); AND TYPE 2000 (WET METHOD AND PARTICLE CONCENTRATION.
PIE GAUGES ARE USED TO MEASURE MAGNETIC FIELD DIRECTION, AND TO A LESSER EXTENT TO ENSURE THE PRESENCE OF AN ADEQUATE MAGNETIC FIELD. PIE GAUGES ARE AN EXCELLENT TOOL FOR PROCEDURE DEVELOPMENT, AND AS AN INSPECTOR'S AID TO DETERMINE DEFECT...
W-SERIES POWDER BULBS (APPLICATORS) ARE OFFERED IN 3 CONVENIENT SIZES, FOR DUSTING DRY METHOD POWDER DURING INSPECTION. W-PB'S ARE MADE FROM LATEX RUBBER, SO THEIR SUITABLE FOR HOT OR COLD CLIMATES.
Magnetic Particle Inspection Kits are available in 6 different configurations.All Kits are supplied with Westerns 12 Page Operator Instructions.
Dry Method MPI Kits
W-DMB, Basic Dry Method Kit▪Carrying Case...
Quantitative Quality Indicator Test Piece Shims
NORE: THESE ARE GENERALLY NOT IN STOCK AND WILL SHIP FROM CANADA
Quantitative Quality Indicators (QQI) are magnetic particle test piece shims with artificial defects used to verify field direction and...
The W-PT-DB is identical to the Standard Stackable W-PT Pull Test Bar, howeverArtificial Defects have been introduced. The Artificial Defects are represented by aCircle in the Center of the Bar and a Transverse Notch toward one end.The Plug is machined...