Created with Sketch. Created with Sketch.

Adhesion testing Expendables

  • Resinlab HT11

    Resinlab HT11

    Recommended replacement for Araldite 2011.  Adhesive has been texted extensively by DeFelsko. ResinLab EP11HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs Approximate Epoxy Yield* 20 mm: ~100 dollies 50 mm: ~16...

    $35.00
    Add to Cart
  • DOLLY- FLAT

    DOLLY- FLAT

    If you have a HATE tester - This is the standard Flat Dolly.  Will also work with the Elcometer 108 Dolly:(304 Stainless Steel)Outside diameter 0.75 inchInside diameter 0.125 inch

    $26.00
    Add to Cart
  • DeFelsko ATA and ATM Adhesion Tester Dolly 10 Mil, 14 Mil, 20 Mil, 50 Mil

    AT DOLLY

    DolliesLoading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 Dolly MultipacksLarger quantity...

    $30.00
    Choose Options
  • ARALDITE EPOXY ADHESIVE / Large 7.2 ounce.

    ARALDITE EPOXY ADHESIVE / Large 7.2 ounce.

    THIS PRODUCT IS NOT CURRENTLY AVAILIBLE.  REPLACE WITH DEFELSKO HT11 2011 Huntsman 2 Part Epoxy. 24 hr. cure.   When properly applied will pull in excess of 3,500 PSI.  Large 7.2 oz tubes will do several hundred dollies...

    $0.00