Western Instruments Basic Plus Pit Gauge- 3.5" Blade (Standard or Magnetic) $180.00 Choose Options Compare
#1 - #3 Pit Depth Gauge Tip Pit Gauge Contact PointsWestern offers a variety of Contact Points, for the Pit Gauge Product Series, which are all 0.625 (16mm) long. Any ADG Contact point can be used with our special dial... $12.00 Choose Options Compare
10 Pound Pull Test Bar (Traceable to NIST) The W-PT is the fastest way to verify the operation and specification compliance of MPI Yokes The W-PT-DB is made with Artificial Defects for training and demonstration purposes. The W-PT can be... $95.00 Add to Cart Compare
10, 20 or 50 Gauss Calibration Checker Used to verify the accuracy of the Western Instrument gauss gauges. $325.00 Choose Options Compare
10, 20 or 50 Gauss Field indicator WESTERN INSTRUMENTS OFFERS 3 MODELS OF OUR POPULAR W-FI FIELD INDICATORS. FIELD INDICATORS (MAGNETOMETERS) ARE DESIGNED TO AID MPI INSPECTORS TO: - Check for Magnetism... $50.00 Choose Options Compare
Analog and Digital Indictor Gauge Western Instruments Dial Pit Gauges, such as a Basic Pit Gauge, can actually be 3 different Models. Our 3 different Dial Indicators are interchangeable, and fit the same Blade, therefore, we can... $70.00 Choose Options Compare
Basic Pit Gauge Basic N88-2 Center Mount 2.5"(64mm) Blade, our most popular Gauge *Optional Digital Indicator Assuring compliance with Corrosion Allowances for equipment wherever Corrosion... $140.00 Choose Options Compare
Basic Plus Pit Gauge- 3.5" Blade (Standard or Magnetic) Assuring compliance with Corrosion Allowances for equipment wherever Corrosion affects materials, such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole... $180.00 Choose Options Compare
Bridging Accessories Parts for Bridging Gauges (N99-9) Main Blade N88-9-1 $330.00 Connector Blade N88-9-2 $85.00 End Blade N88-9-3 $55.00 Slider Blade N88-9-4 $65.00 Tee Sections... $20.00 Choose Options Compare
Bridging Pit Gauge - Standard/PLUS Bridging Pit Gauge System The Bridging Pit Gauge System allows the Corrosion Inspector to Span over or Cantilever into Large Areas of Weight Loss Corrosion, to obtain accurate and... $750.00 Choose Options Compare
Cable Type Permanent Magnet Yoke Westerns' Permanent Magnet Yokes are offered in 2 configurations: WM-5LT and WM-5C. The WM-5C lift over 70 lbs (32 Kg) when new and the WC-5LT over 60 lbs (27.5 Kg), and after years of... $625.00 Add to Cart Compare
Centrifuge Tube (Meets ASTM Specifications) CENTRIFUGE TUBES ARE USED TO PERFORM A SETTLING TESTS ON WET METHOD INSPECTION MEDIA (VISIBLE OR FLUORESCENT). 100ML OF A WELL AGITATED (THOROUGHLY MIXED) BATH IS POURED INTO THE CENTRIFUGE TUBE.THE... $75.00 Add to Cart Compare
Compact 12 Volt DC Yoke WC-8 Premium Compact AC/DC Yoke (Variable DC) Compact, Lightweight, Comfortable ergonomic grip, Grounded solid state switch, Sealed Switch cover, Rugged strain relief Optional UL/CSA Approval AC or DC... $695.00 Add to Cart Compare
Compact AC/DC Yoke (Variable DC) Western Instruments Premium Compact AC/DC Yoke (Variable DC) Compact, Lightweight, Comfortable ergonomic grip, Grounded solid state switch, Sealed Switch cover, Rugged strain relief Optional UL/CSA... $775.00 Add to Cart Compare
Compact Cordless Yoke WC-9 Compact Cordless Yoke Complete Mobility Light weight, Comfortable ergonomic grip, Grounded switch, Powerful lift, Urethane rubber encapsulation Optional UL/CSA Approval The Western... $1,025.00 Add to Cart Compare
Contact Point Extension - 0.5 " All of Western Instruments Pit Gauges have a range of just slightly over 12.7mm or 0.500”, with any one of our 3 types of Contact Points. However, during some inspections, this range is simply... $30.00 Add to Cart Compare
Flexible Magnetic Flux Indicators (Castrol Strips) FOIL MAGNETIC INDICATORS ARE AVAILABLE IN TWO GENERAL TYPES; CASTROL STRIPS; AND QUALITATIVE QUALITY INDICATORS. EACH TYPE OF INDICATOR IS AVAILABLE IN DIFFERENT SENSITIVITIES. INDICATOR STRIPS ARE... $120.00 Add to Cart Compare
Jr. Bridging Pit Gauge Jr. Bridging Pit Gauge Group The Jr. Bridging Pit Gauge Group provides Inspectors with an Economical Alternative to the Bridging Pit Gauge System. The new Jr. Bridging Pit... $415.00 Choose Options Compare
Jr. Tri-Gauge The Junior Tri-Gauge VM® is today’s most accurate Lever Pit Gauge, with a continuing tradition of Metric and Dual Imperial Scales. The Junior Tri-Gauge® serves its traditional use as a... $110.00 Add to Cart Compare
Junior Tri-Gauge VM Junior Tri-Gauge VM® Lever Type Pit & Welding Gauge Part No. N88L-2 Mechanical Lever Pit Gauge with Metric and Imperial Scales Range/Resolution: +/- 3mm (0.100") / 0.2mm (0... $110.00 Add to Cart Compare
Ketos Ring Ketos Rings are outlined in most MPI Specifications, as a tool for the overall evaluation of an MPI System. Provides the operator with a qualitative measure of Defect Sensitivity, Bath (particle)... $495.00 Add to Cart Compare
Light & Compact Permanent Magnet Westerns' Permanent Magnet Yokes are offered in 2 configurations: WM-5LT and WM-5C. The WM-5C lift over 70 lbs (32 Kg) when new and the WC-5LT over 60 lbs (27.5 Kg), and after years of use will... $575.00 Add to Cart Compare
Magnetic Stripe Cards (Particle sensitivity) MAGNETIC STRIP CARDS ARE A CONVENIENT METHOD TO ANALYZE THE SENSITIVITY OF MPI MATERIALS. THREE DIFFERENT STRIPE CARDS ARE AVAILABLE; TYPE A (DRY PARTICLE); TYPE B (WET METHOD); AND TYPE 2000 (WET... $120.00 Choose Options Compare
Pie Gauge (Manufactured to ASTM Specifications) PIE GAUGES ARE USED TO MEASURE MAGNETIC FIELD DIRECTION, AND TO A LESSER EXTENT TO ENSURE THE PRESENCE OF AN ADEQUATE MAGNETIC FIELD. PIE GAUGES ARE AN EXCELLENT TOOL FOR PROCEDURE DEVELOPMENT,... $135.00 Add to Cart Compare
Pocket Pit Gauges Pocket Pit Gauge The Reversible Blade of the Pocket Pit Gauge (N88-4) is used to measure isolated pitting with its two Contact Surfaces, a 1.5" (38mm) long Knife Edge Blade, as well as a Spot Blade... $250.00 Choose Options Compare