Created with Sketch. Created with Sketch.

Coating Inspection Equipment - Paint Inspection

  • 1 ROLL ADHESIVE ISO TAPE

    The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross Cut...

    $25.00
    Add to Cart
  • 4 to 60 mil WFC

    TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4).  Similar to the Nordson in looks and quality but less expensive.

    $49.00
    Add to Cart
  • Abrasive Test Kit - Chloride or ASTM D4940

    Abrasive Contamination Test Kit.  Can be used to check for specific ion for chloride with included Kitatagua tubes or use in accordance with ASTM D4940 with conductivity meter (not included).  Comes with 4 tests. Once the full kit is purchased,...

    $60.00
    Choose Options
  • ASTM Adhesion Tape

    Permacel 99 has been discontinued and this tape is a suitable replacement for the Permacel P99 tape which is used in accordance with ASTM D3359 – the cross cut adhesion test method for measuring adhesion using the tape test.  1 inch wide 5.0...

    $28.00
    Add to Cart
  • Bacharach Sling Psychrometer F

    These slings are accurate upto 85F.  Above this temperature I recommend going electronic. Fast, accurate measurement of RH for many applications Simple to operate and read the measurements Designed to be compact with portability in mind The Sling...

    $95.00
    Choose Options
  • Banana Gauge

    PosiTest®   Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel PosiTest magnetic pull-off thickness gage (banana gauge) for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing,...

    $350.00
    Choose Options
  • Basic Inspection Kit

    The Basic Inspection kit Includes the Defelsko Positector 6000.  The most versatile DFT Gauge on the market.  One body fits all the probes- Ferrous, Nonferrous and combination probes.    You never need to by another meter if your...

    $995.00
    Choose Options
  • Basic Inspection Kit Plus

    Be the :Baddest Inspector" on the block. The Basic Inspection kit PLUS includes everthing you need, including: the Defelsko Positector 6000.  The most versatile DFT Gauge on the market.  One body fits all the probes- Ferrous, Nonferrous and...

    $2,200.00
    Choose Options
  • Blotter Paper - Pack of 10 or 25

    ASTM D4285 - Standard Test Method for Indicating Oil or Water in Compressed Air - Blotter Paper Significance and Use 2.1 Clean compressed air is required to prevent contamination of coating materials and surfaces being prepared for coating. This test...

    $15.00
    Add to Cart
  • Burnishing Tool

    Stainless Steel burnishing tool.  The last one you will ever need.  Quit breaking the plastic ones.  If you want to go old scool we have them too.

    $10.00
    Choose Options
  • Certified Polystyrene Blocks

    DeFelsko Certified Polystyrene Test Block Kits DeFelsko Certified Polystyrene Test Block KitsUsed to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness...

    $175.00
    Choose Options
  • CFM/CMM Mini Thermo-Anemometer

    Large display of Airflow or Air Velocity The AN100 CFM/CMM Thermo-Anemometer can simultaneously display Air Flow or Air Velocity plus Ambient Temperature. Easy to set area dimensions (ft² or m²) are stored in the meter's internal memory for the...

    $107.99
    Add to Cart
  • Coating Thickness Shims

    Certified Plastic Shims For use with magnetic, eddy-current and ultrasonic coating thickness gages.(Not intended for use with Type 1 magnetic pull-off type gages)   Shims Overview   Simulate a coating over a particular...

    $10.00
    Choose Options
  • Contractor Basic Inspection Kit

    Contractors require slightly different equipment than inspectors.  This modified version of the Basic Inspection kit Includes the tools that every contractor should have on site.   Many contractors prefer a Banana Gauge over electronic gauges...

    $1,095.00
    Choose Options
  • Cross Cut Adhesion CC2000 BASIC KIT

    The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100...

    $225.00
    Choose Options
  • Cross Hatch Adhesion Test Kit

    Economy Crosshatch Kit - The only comprimise on this kit is the case.  Includes everthing needed to preform an ASTM D3359 Crosshatch Test.  Includes TQC Crosshatch handles and blades along with Tape and a Magnifine glass.   Choose...

    $255.00
    Choose Options
  • Defelsko Ferrous Calibration Standards

    CERTIFIED COATED METAL PLATES Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.Plate Diameter: 38 mm (1...

    $325.00
    Choose Options
  • Defelsko Non-Ferrous Calibration Standards

    CERTIFIED COATED METAL PLATES Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.Plate Diameter: 38 mm (1...

    $325.00
    Choose Options
  • Defelsko PosiPen

    PosiPen®   Magnetic Pull-Off Coating Thickness Gage PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as...

    $250.00
    Add to Cart
  • Defelsko Powder Checker Comb

    Powder Comb   Check Powder Thickness Before Curing to Ensure Correct Cured Film Thickness Check Powder thickness with Powder Comb before curing to help ensure correctly cured film thickness the first time through the line.  Avoid stripping and...

    $40.00
    Choose Options
  • Dewpoint Calculator

    The TQC Dew Point calculator is a handy tool to determine dew point temperature based upon the measurements from the sling psychrometer. Includes a Celsius / Fahrenheit converter.

    $50.00
    Add to Cart