MTest X-Cut Template Kit. Simplify X cut testing by using a template. Includes both a Stainless-Steel Template and a Polyurethane Template. Both are coated with a nonslip coating.
SS. X-Cut Template
TQC delivers a wide range of Cross Cut Adhesion knife sizes, available for different coating thicknesses and substrates and according to different standards.
Hardness: HRC 58 +/- 2
Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ISO 2409...
The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard.
To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross Cut...
Our standard ½" Aluminum Pull-Stub. Pack of 100 stubs
Elcometer 106 Adhesion Dollies
Each piston comes complete with the required gasket(s), prelubricated and installed!
The F-8/12 (F-20) Piston, the largest piston we stock at SEMicro, is like having 3 pistons in 1: an F-8, an F-12 and combined as an F-20. This piston is great if you...
The same quality you have come to expect from the P.A.T.T.I.®
Complete Package Retail Price of $999!
Allows for testing coatings up to 5000 psi (using F-8 model with standard 1/2" stubs)
No Conversion Charts...
The GOLD Package now includes a netbook with our exclusive LabVIEW®-Generated analysis software pre-installed!UPDATED NETBOOKS RUNNING WINDOWS 10 OPERATING SYSTEM
(May differ from the image of the laptop above)
The latest in...
PATTI® QUANTUM FEATURES:
The same quality you have come to expect from the PATTI®
The powder-coated box is much more robust than previous PATTI®'s – will maintain its aesthetic value
New regulator eliminates the internal pop...
Permacel 99 has been discontinued and this tape is a suitable replacement for the Permacel P99 tape which is used in accordance with ASTM D3359 – the cross cut adhesion test method for measuring adhesion using the tape test. 1 inch wide 5.0...
The HATE Mark VII coating adhesion testers offer the coating industry new capabilities, from the lab technician and paint chemist to the field inspector and corrosion engineer. The adhesion strength specified can now be proved to have been achieved -...
The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100...
Economy Crosshatch Kit - The only compromise on this kit is the case. Includes everything needed to perform an ASTM D3359 Crosshatch Test. Includes TQC Crosshatch handles and blades along with Tape and a Magnifier glass.
Pull-off Adhesion Testers
Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
If you have a HATE tester - This is the standard Flat Dolly. Will also work with the Elcometer 108
Dolly:(304 Stainless Steel)Outside diameter 0.75 inchInside diameter 0.125 inch
Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
Pull Rate Indicator to manually monitor and adjust the rate of pull
Environmentally sealed enclosure – weatherproof, dustproof...
Concave Dollies for the exterior surface of pipes. Come in various diameters. Requires approximately 3 weeks for delivery. Reuseable.
DolliesLoading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities:
Dolly MultipacksLarger quantity...
Custom sized dolies for curved surfacs. Specifiy curviture. Generallt a 3 week lead time.
2011 Huntsman 2 Part Epoxy. 24 hr. cure. When properly applied will pull in excess of 3,500 PSI. Large 7.2 oz tubes will do several hundred dollies.
PosiTest® AT Verifier
Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
CROSS CUT ADHESION TEST CC1000
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other...
The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100...