TINKER-RASOR

Internal Silicon Rubber electrodes

Internal Electrodes are made to order to fit the exact Inside Diameter of your pipe. Internal Electrodes are made for use with High Voltage (Silicone-Rubber material) and Low Voltage (Sponge material) Holiday Detectors. The electrodes fit pipe ID...

Wire Brush Electrode

Made from very small individual wires, the Wire Brush Electrode meets many different requirements and applications, especially for coated surfaces that are uneven or include fittings, bolts, or other tight corners need to be inspected. The electrode is...

Silicon Rubber Brushes

Made from a unique combination of silicone rubber and carbon, the Silicone-Rubber Brush Electrode meets many different requirements and applications, both on the pipe and off. The electrode is used to inspect weld joints on the outside or coatings...

Half Spring Electrode

Half Circle Electrodes make it easy to go around pipe supports.

Holiday Detector "Stick Type" (same as the DeStearns Model 10/20)

Pulsating Stick Type Holiday Detector with voltage settings from 0.8 to 35 kV in one instrument.  Designed with safety in mind.  The Tinker&Rasor APS is the same as the DeStearns Model 10/20 MODEL: APS HOLIDAY DETECTOR 800 volts to 35,000...

AP/W HOLIDAY DETECTOR HIGH VOLTAGE: 800v TO 35kv

NOTE: This unit is identical to the DE STEARNS 14/20 800 volts to 35,000 volts in 1 instrument FEATURES ·         800 volts to 35,000 volts in one...

FULL circle Rolling Springs

Square cut, tightly wound steel wire, for tight fit and intimate contact to coatings applied to pipelines. Made for use on pipelines, the Full Circle Spring Electrode will inspect the entire coated surface of the pipe in one pass. Available sizes based...