Created with Sketch. Created with Sketch.

MPI - Yokes and Coils

  • Ketos Ring

    Ketos Ring

    Ketos Rings are outlined in most MPI Specifications, as a tool for the overall evaluation of an MPI System. Provides the operator with a qualitative measure of Defect Sensitivity, Bath (particle) Performance, and Equipment Output

    $495.00
    Add to Cart
  • The W-PT-DB is identical to the Standard Stackable W-PT Pull Test Bar, however
Artificial Defects have been introduced. The Artificial Defects are represented by a
Circle in the Center of the Bar and a Transverse Notch toward one end.
The Plug is machined from the same heat of steel as the parent bar.
Circle can be detected from either side. The W-PT-DB is an excellent training and
demonstration fixture, and ensures the 10 Pound Pull Test for AC Yokes.
The Circle is produced by the press fit of a 3/8” (9.5mm) Diameter Plug into the hole in the center of the bar, thus the W-PT-DB is not stackable. The Transverse Notch is approximately 0.016” Wide x 0.032” Deep (0.41mm x 0.81mm), is Epoxy filled, and extends the width of the Bar The Notch is positioned 2 ½” (63.5mm) from the one end of the bar, to allow either indication
to be used.

    Set of 4 Bars (c/w Fastener)

    The W-PT-DB is identical to the Standard Stackable W-PT Pull Test Bar, howeverArtificial Defects have been introduced. The Artificial Defects are represented by aCircle in the Center of the Bar and a Transverse Notch toward one end.The Plug is machined...

    $420.00
    Add to Cart
  • The W-PT is the fastest way to verify the operation and specification compliance of MPI Yokes
The W-PT-DB is made with Artificial Defects for training and demonstration purposes.
The W-PT can be stacked either 4 or 5 high for use with DC Yokes

    10 Pound Pull Test Bar (Traceable to NIST)

    The W-PT is the fastest way to verify the operation and specification compliance of MPI Yokes The W-PT-DB is made with Artificial Defects for training and demonstration purposes. The W-PT can be stacked either 4 or 5 high for use with DC Yokes

    $95.00
    Add to Cart
  • Magnetic Particle Inspection Kits are available in 6 different configurations.

All Kits are supplied with Westerns 12 Page Operator Instructions.

Dry Method MPI Kits

W-DMB, Basic Dry Method Kit
▪Carrying Case.                                                             ▪Powder Bulb.
▪1 x 1.75 lbs. (0.8kg) Container of Dry Powder        ▪Field Indicator (Magnetometer).
(White, Yellow, Red, or Black).                                  

W-DM Deluxe Dry Method Kit
▪Carrying Case.                                                                ▪Powder Bulb.
▪4 x 1.75 lbs. (0.8kg) Containers of Powder               ▪Field Indicator (Magnetometer).
(White, Yellow, Red, Black).

W-WMB Basic Wet Method Kit
▪Carrying Case.                                         ▪Field Indicator (Magnetometer)   
▪Aerosol Cans of;
        1 - White Contrast Paint ▪Powder Bulb.
        1 - Black Bath
        2 - Cleaner/Remover

W-WD Wet/Dry Method Kit
    ▪Carrying Case ▪4 x 2 lbs.
    ▪(1 kg) Containers of Powder (White, Yellow, Red, Black).
    ▪Aerosol Cans of;
        1 - White Contrast Paint ▪Powder Bulb.
        1 - Black Bath
        2 - Cleaner/Remover
    ▪Field Indicator (Magnetometer).

W-WM Wet Visible Kit
    ▪Carrying Case
    ▪Aerosol Cans of
        2 White Contrast Paint
        2 Black Particle Bath
        4 Cleaner Remover
    ▪Centrifuge Tube or 2 Castrol Strips
    ▪Field Indicator (Magnetometer)
    ▪Operator Instructions

W-WF Wet Fluorescent Kit
    ▪Carrying Case ▪Aerosol Cans of;
        4 Fluorescent Particle Bath
        4 Cleaner Remover
    ▪Centrifuge Tube or 2 Castrol Strips
    ▪Field Indicator (Magnetometer).
    ▪UV Lamp c/w Carrying Case
    Spectroline CH-50/12 (12 Volt)
        c/w Western Instruments Battery and Charger Note:
        Options for BIB-150P and SB-100P Dry Powder weights are nominal

    Powder Kits

    Magnetic Particle Inspection Kits are available in 6 different configurations.All Kits are supplied with Westerns 12 Page Operator Instructions. Dry Method MPI Kits W-DMB, Basic Dry Method Kit▪Carrying Case...

    $95.00
    Add to Cart
  • Pie Gauge (Manufactured to ASTM Specifications)

    Pie Gauge (Manufactured to ASTM Specifications)

    PIE GAUGES ARE USED TO MEASURE MAGNETIC FIELD DIRECTION, AND TO A LESSER EXTENT TO ENSURE THE PRESENCE OF AN ADEQUATE MAGNETIC FIELD. PIE GAUGES ARE AN EXCELLENT TOOL FOR PROCEDURE DEVELOPMENT, AND AS AN INSPECTOR'S AID TO DETERMINE DEFECT...

    $135.00
    Add to Cart
  • Powder Bulbs (Applicators)

    Powder Bulbs (Applicators)

    W-SERIES POWDER BULBS (APPLICATORS) ARE OFFERED IN 3 CONVENIENT SIZES, FOR DUSTING DRY METHOD POWDER DURING INSPECTION. W-PB'S ARE MADE FROM LATEX RUBBER, SO THEIR SUITABLE FOR HOT OR COLD CLIMATES.

    $0.00
    Add to Cart
  • Magnetic Stripe Cards (Particle sensitivity)

    Magnetic Stripe Cards (Particle sensitivity)

    MAGNETIC STRIP CARDS ARE A CONVENIENT METHOD TO ANALYZE THE SENSITIVITY OF MPI MATERIALS. THREE DIFFERENT STRIPE CARDS ARE AVAILABLE; TYPE A (DRY PARTICLE); TYPE B (WET METHOD); AND TYPE 2000 (WET METHOD AND PARTICLE CONCENTRATION.

    $120.00
    Choose Options
  • Flexible Magnetic Flux Indicators (Castrol Strips)

    Flexible Magnetic Flux Indicators (Castrol Strips)

    FOIL MAGNETIC INDICATORS ARE AVAILABLE IN TWO GENERAL TYPES; CASTROL STRIPS; AND QUALITATIVE QUALITY INDICATORS. EACH TYPE OF INDICATOR IS AVAILABLE IN DIFFERENT SENSITIVITIES. INDICATOR STRIPS ARE USED TO EVALUATE THE SENSITIVITY OF A GIVEN MAGNETIC...

    $120.00
    Add to Cart
  • Centrifuge Tube (Meets ASTM Specifications)

    Centrifuge Tube (Meets ASTM Specifications)

    CENTRIFUGE TUBES ARE USED TO PERFORM A SETTLING TESTS ON WET METHOD INSPECTION MEDIA (VISIBLE OR FLUORESCENT). 100ML OF A WELL AGITATED (THOROUGHLY MIXED) BATH IS POURED INTO THE CENTRIFUGE TUBE.THE BATH IS ALLOWED TO SETTLE (AS PER SPECIFICATION) FOR A...

    $75.00
    Add to Cart
  • 10, 20 or 50  Gauss Field indicator

    10, 20 or 50 Gauss Field indicator

        WESTERN INSTRUMENTS OFFERS 3 MODELS OF OUR POPULAR W-FI FIELD INDICATORS. FIELD INDICATORS (MAGNETOMETERS) ARE DESIGNED TO AID MPI INSPECTORS TO: - Check for Magnetism before testing - Check the Polarity of a Field. - Check...

    $50.00
    Choose Options