TQC/Sheen

1 ROLL ADHESIVE ISO TAPE

The TQC Tape For Adhesion Test (ISO 2409:1999) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit...

10X Surface Microscope

Graduated Surface microscope with built-in LED ring light and measuring scale in pocket size complete with hard leather case. Ideal for inspecting, tracking, and measuring coating defects...

4 to 60 mil WFC

TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4).  Similar to the Nordson in looks and quality but less expensive.

Amine Blush Kit

The TQC Amine Blush Kit is a quick and easy amine blush test. Due to advanced research on suitable media, the TQC Amine Blush Kit is the easiest and quickest on the market. It is based on a double...

BIRD Film Applicator - SingleSided

TQC Sheen Bird-type film applicator with one flat edge. One application side for applying 1 predefined thickness. The Bird-type applicator single gap is available in film width 50 and 75 mm and...

Bird-Type film applicator - 4 sided

TQC Sheen Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 60, 75,...

Bresle Patches - TQC

TQC Bresle patches mate to meet ISO 8602-6 Standards.  has a clean removal, negligible patch contamination, no breaking foam and is silicone-free.  Box of 25.

BUCHHOLZ HARDNESS TESTER

The TQC Buchholz Hardness Indentation Test provides a method for carrying out an indentation test on coatings complying with the ISO 2815-2003 standard. The TQC Buchholz Hardness Indentation Test...

Compact Film Applicator/ Draw Down

ASTM Standard - ASTM D823 The TQC AFA Compact is a film applicator that accepts charts up to A4 size or 8.3 x 11.7 inch (210 x 297 mm). Application speed can be set from 1 to 150 mm/s. The AFA...

Concrete Moisture Meter - 0-6%

The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just...

CONICAL BEND TESTER ISO/ASTM

The TQC Bend Test Conical Mandrel “Pro” is a laboratory apparatus to bend coated test panels over a conical shaped mandrel to assess the elasticity or resistance of a coating-, paint or...

Copy of MFFT-MINIMUM FILM FORMING TEMPERATURE BAR 10 Sensors

Description Temperature gradient plate for determining minimum film forming temperature test.The minimum film forming temperature is the lowest temperature at which an emulsion, latex or adhesive...

Copy of RESISTIVITY GAUGE FOR COATINGS

A digital instrument to measure the resistivity of paints, varnishes, and liquids in a fast and precise way. Indispensable for the correct functioning of electrostatic paint installations. It helps...

Cross Cut Adhesion CC2000 BASIC KIT

The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross...

CurveView Gradienty Oven

The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles, varying from ambient +5˚C to 250˚C / ambient +9˚F to...

CYLINDRICAL MANDREL TESTER ISO-DIN-ASTM - METRIC

The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519. A test panel (max. size 150 x 100 mm) is bent over a...

Densimeter H-300S

Densimeter to calculate the specific gravity. The density value is displayed automatically after the elapsed time. Density resolution: 0,001 g/cm3 Scale capacity: 0,01….300g Measuring time:...

DRYING TIME RECORDER

The new TQC Drying Time Recorder is a fully digitally controlled machine that operates conform the BK (Beck Koller) method Standards: ASTM D5895, DIN EN 14022, ISO...

Dust Tape Kit

The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating...

ELITE CONDUCTIVITY / TDS / SALINITY

Oakton® CTSTestr™ 50 Waterproof Pocket Conductivity, TDS, and Salinity Testers   Reliable 3-in-1 tool measures conductivity, TDS, and salinity Redesigned leakproof cap...

FILM Applicator 2 RESERVOIR, 4 GAP

4-SIDED FILM APPLICATOR, DUAL RESERVOIR, 100|200|300|400ΜM Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the...

FILM APPLICATOR FOR SAG AND LEVELLING

Standards: ASTM D1084, ASTM D4400 The TQC Sag and Levelling Film Applicator is a special film applicator with dual function. One side with 10 gaps from 75 to 300 micron...

FILM ApplicatorLICATOR 2 RESERVOIR, 4 Gap

Cube applicator for applying a paint film of uniform thickness. Each Cube Applicator can apply 2 pre-defined thicknesses, or 2 thicknesses to customer specifications. TQC Sheen Cube Applicators are...

Film Applicators "BAKER" type 4-sided

Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different predefined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and...

G116C WICKS (PACK OF 4) [BACHA

WICKS (PACK OF 4) [BACHARACH]