Zero Plates are available as uncoated precision machined steel or aluminum (6061-T6) in a variety of plate sizes.
PosiTector 6000 F, FS, FRS, FN, FNS,...
Certified Plastic Shims
For use with magnetic, eddy-current and ultrasonic coating thickness gages.(Not intended for use with Type 1 magnetic pull-off type gages)
Simulate a coating over a particular...
DeFelsko Certified Polystyrene Test Block Kits
DeFelsko Certified Polystyrene Test Block KitsUsed to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness...
Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel
PosiTest magnetic pull-off thickness gage (banana gauge) for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing,...
DeFelsko PosiTest LPD Accessory Pack LPDACCPK
Includes adaptable sponge hardware and accessories to convert the PosiTest LPD Basic Kit into a PosiTest LPD Complete Kit in a hardshell carrying case.
Adaptable Sponge Hardware
Low voltage Pinhole Detector for Metal and Concrete Substrates
Detects holidays, pinholes and other discontinuities in coatings on metal and concrete substrates.
GroundSense visibly reassures the user that the...
Converts the PosiTest HHD to a wand-type instrument
*PosiTest HHD sold separately
Choose between 13 cm (5") and 50 cm (20") rods
Connect to spring and brush...
Flat Wire Brush Electrodes
HHD Flat Brush 51 mm/2" HHDFLTBRSH2
HHD Flat Brush 152 mm/6" HHDFLTBRSH6
HHD Flat Brush 203 mm/8" HHDFLTBRSH8
HHD Flat Brush 305 mm/12" ...
Rolling Spring Electrodes
Rolling Spring Coil for 4" pipe (102 mm) OD HHDSPRING4
Rolling Spring Coil for 6" pipe (152 mm) OD HHDSPRING6
Rolling Spring Coil for 8" pipe (203 mm) OD ...
CERTIFIED COATED METAL PLATES
Select the Standard that most closely matches the measuring range of your gage.
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.Plate Diameter: 38 mm (1...
Magnetic Pull-Off Coating Thickness Gage
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as...
Check Powder Thickness Before Curing to Ensure Correct Cured Film Thickness
Check Powder thickness with Powder Comb before curing to help ensure correctly cured film thickness the first time through the line. Avoid stripping and...
Non-contact Uncured Powder Thickness Gage
Affordably measures uncured powder coatings using non-contact ultrasonic technology to predict a cured thickness
Dedicated stand-alone unit is ready to measure right out of the...
Coating Thickness Gage for ALL Metal Substrates
Measures coatings on metal substrates. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments...
High voltage Holiday Detector
Detects holidays, pinholes and other discontinuities using pulse DC
Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue
Regulated pulse DC voltage...
Pull-off Adhesion Testers
Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
DeFelsko Certified SPG Standards
Ideal for use in calibration labs
Certified and labeled in both Metric and Imperial unitsComes with a Sample Certificate of Accuracy
Used to verify the accuracy and operation of surface profile depth micrometers...
Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
Pull Rate Indicator to manually monitor and adjust the rate of pull
Environmentally sealed enclosure – weatherproof, dustproof...
20 mm Conversion KitOrder Code: AT20KIT
Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies
Ideal for high bond strength finishes such as coatings on metal
Includes 20 mm stand-off, 20 mm hole saw and 20 mm...
DolliesLoading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities:
Dolly MultipacksLarger quantity...
THIS PRODUCT IS NOT CURRENTLY AVAILIBLE. REPLACE WITH DEFELSKO HT11
2011 Huntsman 2 Part Epoxy. 24 hr. cure. When properly applied will pull in excess of 3,500 PSI. Large 7.2 oz tubes will do several hundred dollies...
PosiTest® AT Verifier
Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
A leading U.S. Manufacturer of coating thickness gages and inspection instruments, has been delivering Simple, Durable and Accurate gages since 1965. Family owned and operated in Northern New York, their state of the art facility houses research, development, manufacturing, quality, sales, training and service departments. MTest is currently a DeFelsko distributor. We sell DeFlesko products such as the DeFelsko positector system, DeFelsko DFT Combos, and more...
At present, DeFelsko have over 70 models of coating thickness gages and inspection instruments, used for a wide variety of applications in a broad range of industries - all vastly popular throughout the world. With unequaled handling characteristics and easy, trouble-free operation. They are simple to use and employ leading-edge technology. They come complete with a 30-day money-back guarantee and a 2-year warranty.
We have a wide range of DeFeslko products in our assortment. For example, we have DeFelsko adhesion testing machines that measure how well the coating has adhered to the substrate or the coating. We also have DeFelsko calibration standards products, such as certified coated metal plates and polystyrene blocks. These products are ideal for verifying the accuracy and operation of coating thickness gages. They serve as an important component for quality control. To check the powder coating thickness, so you may avoid stripping and re-coating, we offer DeFelsko Powder Coating Thickness products. Further, you can find DeFelsko Holiday Pinhole Detection products that detect pinholes in metal and concrete substrates. This product line includes, accessories such as brushes for the Pinhole Detection products.
Are you looking for dry film thickness meters to measure coatings like paint, enamel, plating or galvanizing on steel? Discover our DeFelsko Dry Film Thickness Meters products. We offer, for example, the DeFelsko PosiPen, a Magnetic Pull-Off Coating Thickness Gage. Lastly, you can also find DeFelsko Air Leak Detector products. With our air leak detector, you can quickly and easily detect air and water leaks in building envelopes and rigid air barrier systems.
There are a number of advantages that can be named for the DeFelsko products. The products are known for their easy, trouble-free operational use. The equipment is easy to use and very popular in many industries because of it. Another benefit is, DeFelsko products use leading-edge technology, ensuring that they are up to the task and obey to the standard.
The training for the equipment depends on the depth you wish to go for the application. The equipment is very user-friendly out of the box. When you get into the software, that is where is takes a little time to train yourself to increase proficiency. However, there are some tips and tricks to make using any of the DeFelsko equipment easier and more efficient, which we at MTest are more than excited to teach and train on any of the equipment we offer. We offer on-site and over the phone training for any products we sell, it will be our pleasure to talk with you on the phone to get training setup or to answer any questions. Please give us a call at 281-359-2215 and ask for Tom or Andrew.