Silicon Rubber Brushes

Made from a unique combination of silicone rubber and carbon, the Silicone-Rubber Brush Electrode meets many different requirements and applications, both on the pipe and off. The electrode is used to inspect weld joints on the outside or coatings...

Half Spring Electrode

Half Circle Electrodes make it easy to go around pipe supports.

Holiday Detector "Stick Type" (same as the DeStearns Model 10/20)

Pulsating Stick Type Holiday Detector with voltage settings from 0.8 to 35 kV in one instrument.  Designed with safety in mind.  The Tinker&Rasor APS is the same as the DeStearns Model 10/20 MODEL: APS HOLIDAY DETECTOR 800 volts to 35,000...

AP/W HOLIDAY DETECTOR HIGH VOLTAGE: 800v TO 35kv

NOTE: This unit is identical to the DE STEARNS 14/20 800 volts to 35,000 volts in 1 instrument FEATURES ·         800 volts to 35,000 volts in one...

STEP BLOCKS FOR UT METERS

Calibration Blocks   Description           Matl             Price $  STEEL      4 Step - .250 to 1.0...

TQC BRESLE TEST

The Bresle Kit – Sodium Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water, and a conductivity gauge...

X-CUT Template Kit

MTest X-Cut Template Kit.  Simplify X cut testing by using a template.  Includes both a Stainless-Steel Template and a Polyurethane Template.  Both are coated with a nonslip coating.   Includes SS. X-Cut Template Polyurethane...

TQC CC1000/2000/3000 Adhesion Blades

TQC delivers a wide range of Cross Cut Adhesion knife sizes, available for different coating thicknesses and substrates and according to different standards. Hardness: HRC 58 +/- 2 VF2355 Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ISO 2409...

ZERO PLATES

Zero Plates   Zero Plates are available as uncoated precision machined steel or aluminum (6061-T6) in a variety of plate sizes. Order Guide Order  Code Ideal for Type Plate Size STDZSTL PosiTector 6000 F, FS, FRS, FN, FNS,...

Coating Thickness Shims

Certified Plastic Shims For use with magnetic, eddy-current and ultrasonic coating thickness gages.(Not intended for use with Type 1 magnetic pull-off type gages)   Shims Overview   Simulate a coating over a particular...

Certified Polystyrene Blocks

DeFelsko Certified Polystyrene Test Block Kits DeFelsko Certified Polystyrene Test Block KitsUsed to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness...

FM Banana Gauge

PosiTest®   Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel PosiTest magnetic pull-off thickness gage (banana gauge) for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing,...

AIR LEAK DETECTOR

DeFelsko PosiTest AIR Leak Tester Quickly and easily detect air and water leaks in building envelopes and rigid air barrier systems. Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid...

Low Voltage Accessories (LPD AND TQC)

DeFelsko PosiTest LPD Accessory Pack LPDACCPK Includes adaptable sponge hardware and accessories to convert the PosiTest LPD Basic Kit into a PosiTest LPD Complete Kit in a hardshell carrying case. Adaptable Sponge Hardware Roller Internal...

LOW VOLTAGE LPD

PosiTest® LPD   Low voltage Pinhole Detector for Metal and Concrete Substrates Detects holidays, pinholes and other discontinuities in coatings on metal and concrete substrates. GroundSense visibly reassures the user that the...

HHD ACCESSORIES

Handheld Wand Converts the PosiTest HHD to a wand-type instrument *PosiTest HHD sold separately   Extension Rods Choose between 13 cm (5") and 50 cm (20") rods   Electrode Adaptors Connect to spring and brush...

HHD BRUSHES

Flat Wire Brush Electrodes   HHD Flat Brush 51 mm/2"        HHDFLTBRSH2 HHD Flat Brush 152 mm/6"      HHDFLTBRSH6 HHD Flat Brush 203 mm/8"      HHDFLTBRSH8 HHD Flat Brush 305 mm/12"   ...

HHD SPRINGS

Rolling Spring Electrodes   Rolling Spring Coil for 4" pipe (102 mm) OD     HHDSPRING4   Rolling Spring Coil for 6" pipe (152 mm) OD     HHDSPRING6   Rolling Spring Coil for 8" pipe (203 mm) OD   ...

6000 Miscellaneous Accessories

Probe Foot Rings Probe Foot Rings are ideal for use on thin, soft coatings. Protect coatings from unnecessary wear while using Scan or Fast mode to measure large objects ‍For use with all PosiTector 6000 'regular' separate...

Pro Professional Single Purpose HI-LO Welding Gauge

G.A.L. Gage Co. GAL-2Pro Professional Single Purpose HI-LO Welding Gauge Cat # 2Pro Made in USA Features Measurement Scale: Inch or Metric Root Weld Space Eliminates Rejects - Improves Productivity Internal Misalignment

HoldTight 55 GALLON DRUM

HoldTight® 102 is the only NONIONIC salt remover on the market. Other salt removers use Salts to remove Salts. After using the other salt removal products you must WASH OFF the Salt removers because they are as bad as what you are trying to remove...

SST KIT P

PosiPatch Starter Kit For use with existing conductivity meters. Try the revolutionary, reusable PosiPatch with a low cost trial pack. The PosiPatch Starter Kit can be purchased with either a Standard or Flexible magnetic ring...

Defelsko Non-Ferrous Calibration Standards

CERTIFIED COATED METAL PLATES Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.Plate Diameter: 38 mm (1...

MBX Bristle Blaster Electric

MBX® ELECTRIC VARIOMATIC The MBX® – the one step tool that easily removes rust, corrosion, oxidation, adhesives, gaskets, layers of paint, undercoating, sealers, vinyl and dresses weld seams...

Dakota ZX-6 Through Coating

Specifications PHYSICAL     Weight: 11 ounces (with batteries) Size: Width (2.5 in / 63.5 mm)Height (5.17 in / 131.3 mm)Depth (1.24 in / 31.5 mm) Operating Temperature: -22 to 167F (-30 to 75C). Case: Extruded aluminum body with...