Coating Properties - TQC Laboratory Equipment

STANDARD BALANCE, 0-610G

SC600: Electronic Counting Scale/Balance Professional Electronic Counting and Weighing Scale with Load Cell Transducer SC600 is an Electronic Counting Scale/Balance with Load Cell Transducer. This scale is for professional electronic counting and...

BIRD Film Applicator - SingleSided

TQC Sheen Bird-type film applicator with one flat edge. One application side for applying 1 predefined thickness. The Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat...

FILM Applicator 2 RESERVOIR, 4 GAP

4-SIDED FILM APPLICATOR, DUAL RESERVOIR, 100|200|300|400ΜM Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with...

FILM ApplicatorLICATOR 2 RESERVOIR, 4 Gap

Cube applicator for applying a paint film of uniform thickness. Each Cube Applicator can apply 2 pre-defined thicknesses, or 2 thicknesses to customer specifications. TQC Sheen Cube Applicators are ideal for applying paint on test panels used on for...

PYCNOMETER Density Cup -100cc or 50 cc (SS or AL)

Specific Gravity Cup for determining the specific gravity or density (or weight per gallon wpg) of coatings, pastes or similar liquids.Density is defined as weight per unit volume at a specified temperature.Specific Gravity Cups (or pycnometers) are...

The PosiTector Shore Hardnesss Durometer

PosiTector® SHD   Shore Hardness Durometers for the indentation hardness of non-metallic materials Handheld electronic instrument measures the indentation hardness of non-metallic materials. Two durometer models are available for...

Barcol Hardness Impressor

PosiTector® BHI   Barcol Hardness Impressor Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic Easy-to-read digital...

SHORE HARDNESS GAUGE TEST STAND

The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture. With this test stand hardness tests of rubber...

SHORE HARDNESS TESTBLOCK KIT

Shore A and D Test Blocks Test Block Type D 25 (Red) Test Block Type D 46 (Black) Test Block Type D 75 (Blue) Test Block Type A 30 (Black) Test Block Type A 50 (Grey) Test Block Type A 75 (Red)

SoloGloss 60 - PolyGloss 60/20/85

Which Glossmeter suits which application? The TQC Sheen Glossmeter comes in two models. The Sologloss glossmeter measures 60° and the Polygloss glossmeter 20°/60°/85°. The 60º measuring angle can be used for any surface, from...