Telescopic Probe Extender

Telescopic Probe Extender This lightweight, portable device increases the reach of PosiTector 6000 regular cabled probes up to 124 cm (49"), ergonomically measuring overhead or underfoot. Includes a built-in mount for securing the...

PosiTector 200 Coatings on Concrete and other nonmetallic substrates.

PosiTector® 200   Coating Thickness Gages for Non-Metal Substrates Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickness over wood, concrete, plastic and more. Advanced...

High Voltage HHD Kit

PosiTest® HHD   High voltage Holiday Detector Detects holidays, pinholes and other discontinuities using pulse DC Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue Regulated pulse DC voltage...

ASTM Adhesion Tape

Permacel 99 has been discontinued and this tape is a suitable replacement for the Permacel P99 tape which is used in accordance with ASTM D3359 – the cross cut adhesion test method for measuring adhesion using the tape test.  1 inch wide 5.0...

Digi-Sense Temperature/RH Touch Screen Recorder with NIST Traceable Calibration

8GB on board memory provides virtually unlimited data logging capacity Measures, logs, and displays temperature, humidity, and dew point Removable sensor for local or remote measurements using extension cable included Wall mount or desk mount...

MAX XT 4 Gas Detector

4 to 60 mil WFC

TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4).  Similar to the Nordson in looks and quality but less expensive.

Replacement Tape for the Dust Tape Kit

Dust Tape Kit

The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and...

SP3000 - CROSS HATCH TEMP

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross. Additional tools Wet...

SUPER-PIG DESTRUCTIVE COATING THICKNESS GAUGE

The TQC SP1100 SuperPIG is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies...

SHORE HARDNESS GAUGE TEST STAND

The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture. With this test stand hardness tests of rubber...

SHORE HARDNESS TESTBLOCK KIT

Shore A and D Test Blocks Test Block Type D 25 (Red) Test Block Type D 46 (Black) Test Block Type D 75 (Blue) Test Block Type A 30 (Black) Test Block Type A 50 (Grey) Test Block Type A 75 (Red)

MECHANICAL CONCRETE TEST HAMMER

Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and indicates the strength of the concrete...

SoloGloss 60 - PolyGloss 60/20/85

Which Glossmeter suits which application? The TQC Sheen Glossmeter comes in two models. The Sologloss glossmeter measures 60° and the Polygloss glossmeter 20°/60°/85°. The 60º measuring angle can be used for any surface, from...

Positector SMARTLINK

PosiTector® SmartLink   Wirelessly connects PosiTector probes to your Apple iOS or Android smart devices PosiTector SmartLink and free mobile app turns your cell phone or tablet into a virtual PosiTector gage. Take...

Positest Inspection Kit

PosiTector® Inspection Kits   Select from a variety of gage bodies and probes PosiTector Inspection Kits contain a PosiTector gage body (Standard or Advanced) with 3 probes – coating thickness, environmental and...

Probe FS40

Description Plug-in cabled eddy current probe for measuring the specific electrical conductivity of non-ferrous metals according to DIN EN 2004-1 and ASTM E 1004. Areas of application:– Sorting materials– Conclusions about heat damage and...

Probe FS24

Plug-in cabled eddy current probe for measuring the specific electrical conductivity of non-ferrous metals according to DIN EN 2004-1 and ASTM E 1004. Areas of application:– Sorting of materials or parts– Conclusions about heat damage and...

Probe FGAB1.3-FE

Plug-in cabled magnetic induction probe for measuring the delta ferrite content in austenitic and duplex steels. Areas of application:Measuring according to the Basel standard Checking ferrite content in welding seams and austenitic cladding. Measuring...

DeFelsko Inspector's Kit

*ONLINE EXCLUSIVE* Get everything you need to hit the ground running with our DeFelsko Inspector’s Kit — thoughtfully packaged with the most commonly used gauges and accessories. Whether you're just getting started in the field or looking to...

PosiTest ATA Adhesion Tester for Concrete and Tile

Pull-off Adhesion Testers Measures adhesion of coatings to metal, wood, concrete, and other rigid substrates. Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile, and 50 mm C1583 Environmentally sealed enclosure –...

Bristle Blaster Belt 23mm Carbon Steel

BELT, CARBON STEEL BRISTLE BLASTING, 23MM  MBX Carbon SteelBristle Blasting Belt, 23mm Wire: 0.7mm carbon spring steelTips: angled, hardened, sharpenedFinish: coarse, sandblast-like texture PRODUCT DATA SHEET

DeFelsko Surface Profile Probe

PosiTector® SPG   Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile Digital depth micrometer measures and records peak to valley surface profile heights Solvent, acid, oil, water, and dust resistant –...

PosiTest ATA Adhesion Tester

PosiTest® AT   Pull-off Adhesion Testers Measures adhesion of coatings to metal, wood, concrete and other rigid substrates. Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583 Environmentally sealed...