FULL circle Rolling Springs

Square cut, tightly wound steel wire, for tight fit and intimate contact to coatings applied to pipelines. Made for use on pipelines, the Full Circle Spring Electrode will inspect the entire coated surface of the pipe in one pass. Available sizes based...

DPML/+ DATALOGGER

PosiTector® DPML / DPML+   DEW POINT METER LOGGER Magnetic probe attaches to steel structures for monitoring climatic conditions. Measures and records climatic conditions including: relative humidity, air temperature, surface temperature,...

PosiTestor Dew Point Meter

PosiTector® DPM   Dew Point Meters for Environmental Monitoring Measures and records climatic conditions including: Relative humidity, air temperature, surface temperature, dew point temperature, wind speed and difference between...

PosiTest DFT Coating Thickness Gage

PosiTest® DFT   Coating Thickness Gage for ALL Metal Substrates Measures coatings on metal substrates. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments...

Telescopic Probe Extender

Telescopic Probe Extender This lightweight, portable device increases the reach of PosiTector 6000 regular cabled probes up to 124 cm (49"), ergonomically measuring overhead or underfoot. Includes a built-in mount for securing the...

PosiTector 200 Coatings on Concrete and other nonmetallic substrates.

PosiTector® 200   Coating Thickness Gages for Non-Metal Substrates Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickness over wood, concrete, plastic and more. Advanced...

High Voltage HHD Kit

PosiTest® HHD   High voltage Holiday Detector Detects holidays, pinholes and other discontinuities using pulse DC Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue Regulated pulse DC voltage...

ASTM Adhesion Tape

Permacel 99 has been discontinued and this tape is a suitable replacement for the Permacel P99 tape which is used in accordance with ASTM D3359 – the cross cut adhesion test method for measuring adhesion using the tape test.  1 inch wide 5.0...

Digi-Sense Temperature/RH Touch Screen Recorder with NIST Traceable Calibration

8GB on board memory provides virtually unlimited data logging capacity Measures, logs, and displays temperature, humidity, and dew point Removable sensor for local or remote measurements using extension cable included Wall mount or desk mount...

MAX XT 4 Gas Detector

Western Instruments Super-bright Rechargeable 365 nm Flashlight

he W-Series SPR-365V2 is a Powerful, rechargeable, high-intensity Longwave (UV A) inspection flashlight featuring the best in LED technology! This second generation light provides 20% more UV output than any competitive models The SPR-365 UV Lamp makes a...

4 to 60 mil WFC

TQC INOX High Precision Wet Film Thickness Gauge 4-60 mils in 16 steps (4x4).  Similar to the Nordson in looks and quality but less expensive.

Replacement Tape for the Dust Tape Kit

Dust Tape Kit

The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and...

SP3000 - CROSS HATCH TEMP

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross. Additional tools Wet...

SUPER-PIG DESTRUCTIVE COATING THICKNESS GAUGE

The TQC SP1100 SuperPIG is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies...

SHORE HARDNESS GAUGE TEST STAND

The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture. With this test stand hardness tests of rubber...

SHORE HARDNESS TESTBLOCK KIT

Shore A and D Test Blocks Test Block Type D 25 (Red) Test Block Type D 46 (Black) Test Block Type D 75 (Blue) Test Block Type A 30 (Black) Test Block Type A 50 (Grey) Test Block Type A 75 (Red)

MECHANICAL CONCRETE TEST HAMMER

Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and indicates the strength of the concrete...

SoloGloss 60 - PolyGloss 60/20/85

Which Glossmeter suits which application? The TQC Sheen Glossmeter comes in two models. The Sologloss glossmeter measures 60° and the Polygloss glossmeter 20°/60°/85°. The 60º measuring angle can be used for any surface, from...

Tri-Weld Gauge

The Tri-Weld Gauge provides easy to read measurements of the following welding and fit-up parameters; Internal Hi-Lo, Gap, Filet Height and Leg Length, Weld Height, Undercut Depth, Misalignment, and Angle of Preparation. The Tri-Weld Gauge is equipped...

Junior Tri-Gauge VM

Junior Tri-Gauge VM® Lever Type Pit & Welding Gauge Part No. N88L-2 Mechanical Lever Pit Gauge with Metric and Imperial Scales Range/Resolution: +/- 3mm (0.100") / 0.2mm (0.005")   The Junior Tri-Gauge VM® Lever Type Pit Gauge...

Tri-Gauge

The Tri-Gauge is today's most versatile Lever Pit Gauge, with its Metric and dual Imperial Scales. Additionally, the Tri-Gauge serves as a basic Weld Inspection Gauge for; Undercut Depth, Weld Crown Height, a Porosity (diameter)...

Hate TEST KIT Analog

The HATE Mark VII coating adhesion testers offer the coating industry new capabilities, from the lab technician and paint chemist to the field inspector and corrosion engineer. The adhesion strength specified can now be proved to have been achieved -...

Positector SMARTLINK

PosiTector® SmartLink   Wirelessly connects PosiTector probes to your Apple iOS or Android smart devices PosiTector SmartLink and free mobile app turns your cell phone or tablet into a virtual PosiTector gage. Take...