Toggle menu
281 359-2215
  • 0
  • NIST Certifications and Resources
  • Coating Inspection Equipment - Paint Inspection
  • PosiTector 6000 System
  • DeFelsko - Other Products
  • Coating Properties - TQC Laboratory Equipment
  • Humidity/Salt Fog/Cyclical Cabinets
  • Kitagawa
  • Multimeter and Clampmeters
  • Powder Coating Test Equipment
  • HoldTight® 102 and 365
  • Concrete Testing
  • Metal Testing / UT Testing
  • Pit Depth and Weld Gauges
  • MPI - Yokes and Coils
  • Cathodic Protection
  • Precision Measuring Instruments
  • MBX Belts and Accessories
  • Locating, Boroscopes, Water, Force - Other
  • Flashlights - Light Meters
  • Shop by Brand
  • TQC/Sheen
  • DeFelsko
  • Tinker-Rasor
  • GAL
  • Extech
  • MTest
  • Dakota Ultrasonics
  • General Tool
  • Western Instruments
  • NEBO
  • View all Brands
  • Byko-Test
  • Byko-Test Lite

    • BYK Byko-Test

    Byk

    $849.00
    (No reviews yet) Write a Review
    SKU:
    BYKO-TEST--S
    Adding to cart… category.add_cart_announcement

    Product Description

    The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.

    There is also a dry film thickness only version available, the byko-test Lite.

    • Compact design for one hand operation
    • Color display with 90° and 180° flip screen
    • Automatic substrate recognition
    • Strong wear resistant ruby probe tip
    • Zero, single and two point calibrations
    • Key lock for only taking readings
    • Hi/Low tolerance settings for pass/fail warning
    • Statistic mode with 1000 measurement memory
    • Continuous measurement mode
    • Stability mode warns user when instrument is tilted preventing wrong readings
    • SSPC specific mode for standardized measurement protocols and calibration routines. (byko-test only)
    byko-test - Four measurements in one instrument: Coating thickness Fe/NFe, Dew Point, Air Temperature, Relative Humidity. The byko-test offers a unique solution to monitor environmental conditions while measuring dry film thickness. Air temperature and humidity sensors are built into the gauge. The dew point temperature is displayed to determine, if the conditions are right for painting. The byko-test complies with SSPC PA-2 and ASTM D7091 methods for the measurement of coating thickness. There is a SSPC mode to assist the operator on measurement protocols and calibration. The large, rotating color display is readable in high and low light conditions. It's easy to use with large operating buttons ideal for users wearing gloves.

    byko-test Lite - The byko-test lite is a Ferrous/Non-Ferrous coating thickness gauge with a compact design for easy handling. The gauge body is made from impact resistant material and it's easy to use. The operate buttons are large for users wearing gloves. It automatically recognizes the substrate and switches to the correct setting. An automatic switch-off ensures long battery life. The large color display with a backlight is readable in high and low lighting conditions. The display will automatically rotate to the correct viewing position. In the statistic mode average, minimum, maximum, and standard deviation are displayed. The measurements are automatically stored and downloadable to a PC with the optional USB cable and software.

    Technical Data
      byko-test byko-test Lite
    Measurement: Range: 0 - 79 mils
    0 - 2000 microns
    Accuracy: 0-79 mils ±0.08 mils mils + 3% of measured value
    0-2000 microns ±2 microns +3% of measured value
    Air Temperature: 32° - 122° F (0° - 50° C ) = ±2.7° F (±1.5° C) -
    Relative Humidity : from 20%-70% = ±4%,
    from 0%-19% & 71%-100% = ±6%    		 -
    Standards: ASTM B499, D1400, D7091, D1186
    BS 3900 Part C5, 5411 (3,11)
    DIN 50981, 50984
    DIN EN ISO 2360, 2808
    EN ISO 2178
    SSPC PA2    		 ASTM B 499, D1186, D1400, D7091
    BS 3900 Part C5, 5411 (3,11)
    DIN 50981, 50984
    DIN EN ISO 2360, 2808
    EN ISO 2178
    Substrate Fe: Steel or Iron
    Substrate NFe: Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel
    Minimum Curvature: Convex 5 mm (0.20 in); Concave 30 mm (1.2 in)
    Minimum Substrate: Fe: 0.5 mm (0.019 in); NFe: 0.05 mm (0.002 in)
    Memory: 1000 readings
    Dimensions: 4.53 x 2.65 x 1.75 in (115 x 67 x 44 mm)
    Weight: 5.6 oz (160g)

    Product Videos

    Custom Field

    Product Reviews

    Write a Review