Product Description
PosiPen®
Magnetic Pull-Off Coating Thickness Gage
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel.
- Can be used on small, hot or hard-to-reach surfaces
- Easy-to-Use
- Lightweight - easy to carry, just like a ball point pen
- Rugged - not affected by mechanical shock, acid, oil, water and dust
- No user adjustment required
- Highly wear resistant probe tip for long life and continuous accuracy
- Certificate of Calibration showing traceability to PTB included (Long Form)
Conforms to ASTM D7091/B499, ISO 2808 and others
Features
Durable
- No batteries / electronics
- Rugged - not affected by mechanical shock, acid, oil, water and dust
Specifications
| English | Metric | |
| Range | 0.25 to 20 mils | 5 to 500 microns |
| Tolerance |
±10% and 0.1 mil
|
±10% and 2.5 microns |
| Temperature |
-150° F to 450° F
|
-100° C to 230° C |
Gage comes complete with leather pouch, instructions, Long Form Certificate of Calibration traceable to PTB, two (2) year warranty.
Accurate
- No user adjustment required
- Certificate of Calibration traceable to PTB included
- Highly wear resistant probe tip for long life and continuous accuracy
- Each PosiPen has two scales, mils (inch) and microns (metric)
- Conforms to National and International Standards including ASTM D7091/B499, ISO 2808 and others
Used For:
- Small, hot or hard-to-reach surfaces
- Spot Checks - conveniently fits in a shirt pocket
- Hot Sprayed Coatings
Ideal For:
- Refineries, petrochemical plants
- Platers - electroplating, chrome, zinc, galvanizing
- Powder coaters
Operation
1
Place the tip of the PosiPen on the coated surface and allow the magnet to contact.
2
Pull the PosiPen straight back from the object to be measured while keeping close watch on the appropriate indicator.
3
Note the reading when the magnet releases.
Can be used on small, hot or hard-to-reach surfaces
Triple Indicator Compensates for Gravity
The PosiPen compensates for gravity when measuring in different positions.
- Use the red/silver joining line when the Gage is horizontal (walls).
- Use the green line when the Gage is pointing straight down (green/ground).
- Use the blue line when the Gage is pointing straight up (blue/sky).
Horizontal Use
Vertical Use
(down)
(down)
Vertical Use
(up)
(up)
PRODUCT DATA SHEET
