Product Description
The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting knife of the TQC Cross Cut Adhesion Test Basic Cutter is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test Basic Cutter ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test Basic Cutter contains a grip with cutter.
SP1660
TQC Cross Cut Adhesion Test Basic Cutter, 6 blades, cutting distance 1 mm, acc. to EN ISO
For use on coatings up to 60 m on hard substrates.
SP1661
TQC Cross Cut Adhesion Test Basic Cutter, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 m on soft substrates and coatings from 61 to 120 m on both hard and soft substrates.
to ASTM D-3359 FOR COATINGS UP TO 5 MILS
SP1662
TQC Cross Cut Adhesion Test Basic Cutter, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 m to 250 m on both hard and soft substrates.
(While not ASTM can be used on coatings up to 10 mils Thick)
SP1663
TQC Cross Cut Adhesion Test Basic Cutter, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 m.
PRODUCT DATA SHEET
