my account 
Product Description
Call for Pricing and Availability
281-359-2215
Coatmaster Flex
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
Documents
Coatmaster Flex Description
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints. The portable gauge operates contactless and non-destructive without dangerous emissions. Coatmaster Flex is suitable for coating metal, paper, rubber, ceramics, glass, plastic and wood surfaces.
Avoid rework and rejects: Detect and correct deviations early in the process.
Save material: Reduce your material consumption by up to 30%. This saves money and protects the environment.
Ensure quality: Produce coatings with high accuracy and set new quality standards.
Features:
- Large measuring distance tolerance (2-15cm*)
- Large tilt tolerance (70°*)
- Also suitable for thicker layer thicknesses
- Suitable for measuring moving parts
- Suitable for dry and wet film coatings
- Measurement data saved in the cloud
Coatmaster Flex Technical Data
| Cured powder / dried paints | 1 – 1000 μm |
| Wet paints before drying | 1 – 400 μm |
| Powder coatings before curing | 1 – 400 μm |
| Measuring time | from 20 ms |
| Distance tolerance* | 2 – 15 cm |
| Tilt tolerance | 1 ± 70° |
| Measurement on moving parts | yes |
| Relative standard deviation** | < 1 % |
| Measures coatings of any color (incl. white) | yes |
| Real-time data access via ERP and browser | yes |
| Weight (without battery) | 1.3 kg |
| Dimensions | 374 x 91 x 203 mm |
* Depending on coating and substrate material
** 60 μm powder coating before curing on aluminum, 5 cm working distance
Coatmaster Flex Technical data: Substrate Metal
| Powder coating |
10 – 300 µm |
| Wet coating |
10 – 300 µm |
| Cured coating |
10 – 500 µm |
| Measuring time |
0.25 s |
| Distance tolerance |
2 – 15 cm |
| Tilt tolerance |
± 70° |
| Measurement on moving parts |
yes |
| Relative standard deviation |
< 1 % |
| Waiting time between two measurements |
2 s |
Comments:
All data are valid for a typical system of coating and substrate.
Exact limits always depend on physical properties of the coating material.
Scope of supply:
- Coatmaster Flex
- Rechargeable battery 18V (2x)
- Battery charger
- Transport Case
If you’re looking for an easy, accurate and reliable way to measure powder coating thickness every time, then the Coatmaster Flex Paint Thickness Gauge is the perfect choice for you. This compact and lightweight device provides fast readings in both mils (thousandths of an inch) and microns (one millionth of a meter) with a resolution down to 0.00005”. It can also be used on curves, edges and other hard-to-reach spots that traditional gauges can’t. Plus, it’s powered by rechargeable batteries which provide up to 10 hours of operation before needing a recharge. Get the best solution for your needs with the Coatmaster Flex Paint Thickness Gauge!
Cured powder / dried paints: 1 – 1000 μm
Wet paints before drying: 1 – 400 μm
Powder coatings before curing: 1 – 400 μm
Measuring time: from 20 ms
Distance tolerance*: 2 – 15 cm
Tilt tolerance: 1 ± 70°
Measurement on moving parts: yes
Relative standard deviation**: 1 %
Measures coatings of any color (incl. white): yes
Real-time data access via ERP and browser: yes
Weight (without battery): 1.3 kg
Dimensions: 374 x 91 x 203 mm
