There are no products listed under this category.
QNix® 1500 / 1200 - by Automation Dr. Nix Paint Thickness Mil Gauge is reliable, easy to use and durable. This series has become one of the most popular paint/coating thickness gauges for applications in the Corrosion Inspection industry, due to the relatively large measuring range of 200 mils on both Fe and NFe modes and its unique design. QNix® 1500 paint gauge is the right gauge for you if you need an easy-to-use paint thickness Gauge for Dry film thickness measurement and if obtaining reliable measurement is your objective. Two independently integrated measurement probes allow you to instantly recognize on which basic substrate you are taking a measurement. You can take coating thickness measurements on steel, iron (Fe) and non-ferrous metals (NFe) like aluminum, zinc, copper, and brass. There is an optional QNix ® 1200 for measurements on Fe -substrate only. In most cases, no calibration is necessary for this paint meter due to the Hall sensor technology. All QNix® paint/coating thickness mil gauges function according to our easy-to-use principle: position, measure and read. The QNix ® 1500/1200 is a complete solution for quality control inspections in the painting industry as using this paint gauge reduces fatigue, especially where operators need to take thousands of readings on flat extending coated metals. Evenly place your paint gauge with the required substrate down and read - an acoustic sound will confirm reading has been taken. The smarter QNix ® 1500/1200 enables better process and quality control.
There are no products listed under this category.