Product Description
The TQC Hardness Pen is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics, or related products. A tungsten carbide tip is drawn over the surface with a defined constant pressure. The pressure on the tip can be changed using the slide or by changing the spring. A visual mark on the surface after use of the TQC Hardness Pen indicates a failure of the surface hardness or wear/scratch resistance. Can be used on flat and curved surfaces.
2 versions available, the Standard & Pro
The Standard version is supplied with 3 springs and one tip:
- 0-3N, graduation 10 g
- 0-10N, graduation 50 g
- 0-30N, graduation 150 g
- Tip 1mm
The Pro version includes the above as well as:
- Tip 0,5mm
- Tip 0,75mm
- Pen holder with guidance wheels, which provides a very stable load on the tip and makes it easier to apply force.
The laser-engraved scale is clearly visible on the grey background.
Standards
According to DIN 55656
Results can be obtained equal to: ISO 1518; AS 3894.4; EN 438-2, SIS 184188, and Corporated Standards Bosch, Volvo, Opel, van Laar.
|
|
SP0015 |
TQC Hardness Test PRO SP0015 |
|
|
SP0010 |
TQC Hardness Test Standard SP0010 |
ACCESSORIES
|
|
ART. NR. SP0022 |
Spring 0- 3000g. graduation 150g. |
|
|
ART. NR. SP0021 |
Spring 0- 1000g. graduation 50g. |
|
|
ART. NR. SP0020 |
Spring 0- 300g. graduation 10g. |
|
|
ART. NR. SP0014 |
Tip for hardness testDiameter: 1 mm |
|
|
ART. NR. SP0013 |
Tip for hardness test Diameter 0.75 mm / R=0,375 |
|
|
ART. NR. SP0012 |
Tip for hardness testDiameter 0.5 mm / R=0,25 |
