AUTOMATION DR. NIX QNIX® 9500 BASIC PAINT THICKNESS GAUGE INTEGRAL PROBE -FE/NFE 50 MILS and FE/NFE 200 MILS
Automation Dr. Nix QNix® 9500 Paint Coating Thickness Gauges with integral probe Fe/Nfe 50 mils is a rugged – IP...
Automation Dr. Nix QNix® 9500 basic Coating Paint Thickness Gauges with integral probe Fe 50 mils is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings...
QNix® 9500 PC software is built-in the gauge body and not dependent on the current version of Windows
QNix® 9500 series of Coating Thickness Gauges is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings per minute), accurate, reliable and repeatable dry Film thickness measurements on both ferrous and non-ferrous metals and Dual probes on all relevant substrates: ISO/FE, NF/FE, ISO/NF. QNix® 9500 is ideal for single-handed operations and uses the proven Hall sensor technology (ISO 2178, ASTM D7091) to measure non-conductive, non-magnetic coating thickness on magnetic substrates such as steel, chrome, copper, zinc. Eddy current principle (ISO 2360, ASTM D7091) is used to measure non-conductive coating thickness on non-ferrous metals substrates. With its ability to interchange probes and statistically (graphic) display, the QNix® 9500 Coating Thickness Gauges covers almost all features of a more advanced Paint Thickness Gauge -Paint Mil Gauge. Available probes for the QNix® 9500 Coating Thickness Gauge, which are either integrated or interchangeable with cable, are built with stainless and enclosed by a protective membrane IP65 for dust resistant (weatherproof). It has a polished ruby tip that is extremely wear-resistant. The QNix® 9500 series of Coating Thickness Gauges come in three versions: Basic, Premium, Premium Plus, fully calibrated and is equipped with easily adjustable features for measuring on rough and curved surfaces. Its low center of gravity and extremely large contact surface ensures correct placement, better handling, and precise measuring results. It comes with a Certificate of Calibration traceable to a national metrology institute PTB.
Measuring duplex coatings with the QNix 9500 premium and premium plus versions: Paint/hot-dip galvanized coatings on steel are simultaneously measured -using a Dual probe, and their thicknesses are displayed separately.
Tough probes (IP65) & robust housing (IP64)
Waterproof-Solvent, acid, oil-resistant
Designed for rough manufacturing environments
Defense, Automotive, commercial & industrial products, medical equipment, shipbuilding, infrastructure, aerospace, offshore, chemical plants, production line testing/simply quality control checks out in the field, etc.
QNix® 9500 - Accuracy of measurement on Fe substrates related to QNix® reference standards: (1 μm + 2 % of the reading) to 2,0 mm; 3 % of the reading from 2,0 mm
• Gauge body with built-in PC software QN9• Fe- and NFe zero-reference plates and two test foils (shims)• Certificate of Calibration traceable to PTB (only with integratedmeasuring probe)• Operation/User manual• USB cable• 2 Mignon batteries 1,5 V (AA) alkaline• Plastic case for transportation and storage
If a probe is ordered with the modular system, these additional components are included in the package:• Probe• Certificate of Calibration traceable to PTB for measuring probe• Probe holder• Probe adaptor cable for extended probe access