Product Description
HT 365™ can be applied to untreated surfaces or those that have been treated with HoldTight® 102.
By preserving the blast for up to one year, HT 365™ allows your crew to work with maximum efficiency, giving you peace of mind that your surface is properly prepped for a quality coating - even if the project cannot be completed right away.
This new product is easily applied by brush, spray or dipping and easily removed by high pressure washing with HoldTight® 102-treated water.
HT 365 works on a variety of metals, including aluminum, nickel, copper, and steel.
HT 365 is Montreal-Protocol compliant and does not violate California Proposition 65 restrictions.
Typical Applications:
• Unpainted metal surfaces
• Equipment in storage
• Machined parts
• Marine exposed components
• Moving parts that cannot be protected with a paint, polymer, or epoxy coating
Application Details:
It can be easily applied via spraying, dip coating, or painting methods. Shake well before use. Surface preparation such as blasting improves functionality of coating but is not required. At a minimum, surface of metal should be clean, dry and free of rust, oil and mill scale. Parts are ready 5 minutes after application. If desired, HT 365 can be removed with a pressure wash of 500 psi or greater including HoldTight® 102 at a 100:1 ratio of potable water to HoldTight® 102.
PRODUCT DATA SHEET
