Product Description
Reaching Pit Gauges have a huge advantage over conventional 'Center Mount' Pit Gauges in that measurements can be taken right next to a weld, reinforcing pad or risers.
Assuring compliance with Corrosion Allowances for equipment wherever Corrosion affects materials, such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components. Due to there versatility, many of our Pit Gauges have other uses, such as wear measurement, Weld Alignment, Structural Fit-up, etc. Western Instruments Dial Pit Gauges allow the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Various types are available for different applications, including the Tri-Gauge for basic evaluation and the Bridging Pit Gauge for evaluating large areas of weight loss corrosion. The right gauge for the right application.
| Model | Part # | Description |
|---|---|---|
| Tri-Gauge | N88-1 | Lever Type Pit Gauge for Evaluation of Corrosion |
| Basic | N88-2 | Centre Mount 2.5"(64mm) Blade, our most popular Gauge |
| Basic Plus | N88-3 | Centre Mount 3.5"(89mm) Blade |
| Basic Plus Magnetic |
N88-3M | Centre Mount c/w Two(2) magnetic cartridges 3.5"(89mm) Blade |
| N88-4 | Dual Edge Blade (reversible) 1.5"(38mm) long and spot base | |
| Reaching | N88-5 | 4.75"(121mm) Blade. End Mount Dial Indicator w/Nose Cutout |
| Reaching Magnetic | N88-5M | 4.75"(121mm) Blade c/w Two(2) magnetic catridges. |
| Reaching Plus | N88-6 | 6"(152mm) Blade. End Mount Dial Indicator w/Nose Cutout |
| Reaching Plus Magnetic |
N88-6M | 6"(152mm) Blade c/w Two(2) magnetic catridges. |
| Reference Gauge | N88-12 | 5.5"(140mm) long, 0.75"(19mm) wide w/inverted V Edge, 2 magnetic cartridges. SImilar and interchangeable with Bridging Pit Gauge Main Blade. |
| NOTE: All Blades are are 0.500"(13mm) wide with a Knife Edge, except the Reference Gauge. | ||
