Product Description
Jr. Bridging Pit Gauge Group
The Jr. Bridging Pit Gauge Group provides Inspectors with an Economical Alternative to the Bridging Pit Gauge System. The new Jr. Bridging Pit Gauge is available as 3 models; the standard Jr. Bridging Pit Gauge, the Plus, and the Super. The standard Jr. Bridging Pit Gauge assembles to an overall length of 13" (340mm). The Jr. Bridging Pit Gauge Plus can be assembled in either Spanning or Cantilevering Configurations up to 15" (394mm) long. While the Jr. Bridging Pit Gauge Super can also be assembled in both Spanning or Cantilevering Configurations, up to 27" (685mm) long.
The Junior's Main Blade, and the optional Extender Blades are fitted with strong magnets that secure any of the Jr. Bridging Pit Gauges to the surface of the workpiece. These Magnetic Hold Downs have several benefits, such as; Aligning the unit to Concave or Convex surfaces, keeping the operator free to record readings or manipulate the assembly when Scanning through Pits and Weight loss Corrosion. These features position the Plus, and the Super far ahead of any competitive units.
Name | Part# | Description |
---|---|---|
Jr. Bridging Pit Gauge |
N88-11 | Main Blade, Imperial Dial Indicator, 2-Extender Tees, 2-End Blades, Hardware, Extra Contact Point, and Carrying Case. |
Jr. Bridging Pit Gauge Plus |
N88-11P | Main Blade, Imperial Dial Indicator, Connector Blade, 2-Extender Tees, 2-End Blades, Hardware, Extra Contact Point, and Carrying Case. |
Jr. Bridging Pit Gauge Super |
N88-11S | Main Blade, Imperial Dial Indicator, 3-Connector Blades, 4-Extender Tees, 2-End Blades, Hardware, Extra Contact Point, and Carrying Case. |
Main Blade | N88-11-1 | Center and End Dial Indicator Mounting Positions, Fitted Permanent Magnets. Cutaway Nose for next to welds. 5.5" (144mm) long. |
Connector Blade | N88-11-2 | Joins Tee Sections to increase length. Fitted Permanent Magnet. 3.5" (90mm) long. |
End Blade | N88-11-3 | Mounts on end of Tee for extra contact. 1.5" (38mm) long. Doubles as Slider Blade for Plus and Super models. |
Extender Tee | N88-11-5 | Extends effective length of all models. 5.5" (140mm) long (Longer Tees are optional). |
Fastener Kit | N88-11-7 | Fasteners, Allen Key, Nylon Thumb Screws, Contact Point. |
Carrying Case | N88-11-8 | Hard Sided Plastic Carrying Case for entire kit. |