Assuring compliance with Corrosion Allowances for equipment wherever Corrosion affects materials, such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components. Due to there versatility, many of our Pit Gauges have other uses, such as wear measurement, Weld Alignment, Structural Fit-up, etc. Western Instruments Dial Pit Gauges allow the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Various types are available for different applications, including the Tri-Gauge for basic evaluation and the Bridging Pit Gauge for evaluating large areas of weight loss corrosion. The right gauge for the right application.
|Tri-Gauge||N88-1||Lever Type Pit Gauge for Evaluation of Corrosion|
|Basic||N88-2||Center Mount 2.5"(64mm) Blade, our most popular Gauge|
|Basic Plus||N88-3||Center Mount 3.5"(89mm) Blade|
|N88-3M||Center Mount c/w Two(2) magnetic cartridges 3.5"(89mm) Blade|
|N88-4||Dual Edge Blade (reversible) 1.5"(38mm) long and spot base|
|Reaching||N88-5||4.75"(121mm) Blade. End Mount Dial Indicator w/Nose Cutout|
|Reaching Magnetic||N88-5M||4.75"(121mm) Blade c/w Two(2) magnetic cartridges.|
|Reaching Plus||N88-6||6"(152mm) Blade. End Mount Dial Indicator w/Nose Cutout|
|N88-6M||6"(152mm) Blade c/w Two(2) magnetic cartridges.|
|Reference Gauge||N88-12||5.5"(140mm) long, 0.75"(19mm) wide w/inverted V Edge,
2 magnetic cartridges. Similar and interchangeable with
Bridging Pit Gauge Main Blade.
|NOTE: All Blades are are 0.500"(13mm) wide with a Knife Edge, except the Reference Gauge.|